risko@dent00x ~ $ cat /usr/share/X11/twm/system.twmrc

-



 risko@dent00x ~ $ equery f twm

 * Searching for twm ...

 * Contents of x11-wm/twm-1.0.12:

/usr

/usr/bin

/usr/bin/twm

/usr/share

/usr/share/X11

/usr/share/X11/twm

/usr/share/X11/twm/system.twmrc

/usr/share/doc

/usr/share/doc/twm-1.0.12

/usr/share/doc/twm-1.0.12/ChangeLog.bz2

/usr/share/doc/twm-1.0.12/README.md.bz2

/usr/share/man

/usr/share/man/man1

/usr/share/man/man1/twm.1.bz2

risko@dent00x ~ $ cp /usr/share/X11/twm/system.twmrc ~/.twmrc

If you wish to change the operation of the window manager, you shouldn’t change the system.twmrc file. Instead, copy it to your home directory, under the name .twmrc, and make changes to that copy. Note that settings in system.twmrc and your own local .twmrc file are not cumulative; even if you only want to make a small change, you will need to copy the whole file.

Comments

Post a Comment

Popular posts from this blog

Uploading Firmware to "bricked" Netgear WNDR3800 from Linux with atftp after botched DD-WRT Firmware Upgrade.

-
Image
The Netgear will only accept the original Netgear FW using this TFTP procedure. All attempts loading DD-WRT this way will look like success from the TFTP Client point of view but Router will ignore it. Original Netgear Instructions for Windows are here: https://kb.netgear.com/22688/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP If you want to Flash the DD WRT FW later, you need to recover to the Netgear FW Version WNDR3800-V1.0.0.16.img as later versions are blocking the DD WRT FW Upload on WebInterface. Set the PC to 192.168.1.x/24  but not .1 as this will be router in the recovery mode. Power Off the WNDR3800. Hold the RESET Button and power On the Router. Watch the Power LED Flashing Amber and then changing to Green, Count at least 10 Green Flashes and Release the RESET button. Try to ping the Router at 192.168.1.1 if you do not see any Ping replies, wireshark it and you might see the replies only in the packet trace, still good. Then upload the FW wit...
Read more

VMware Remote Console detected; unable to proceed with VMware Workstation installation.

-
Image
 risko@funtoox99 ~/Downloads $ sudo sh ./VMware-Workstation-Full-17.0.2-21581411.x86_64.bundle Extracting VMware Installer...done. VMware Remote Console detected; unable to proceed with VMware Workstation installation. risko@funtoox99 ~/Downloads $ vmw vmware-alias-import       vmware-hgfsclient         vmware-rpctool            vmware-user               vmware-vgauth-smoketest   vmware-xferlogs            vmware-checkvm            vmware-installer          vmware-toolbox-cmd        vmware-user-suid-wrapper  vmware-vmblock-fuse       vmwgfxctrl                 vmware-gksu               vmware-namespace-cmd      vmware-usbarbitrator...
Read more

zabbix agent on gentoo

-
add Use Flag agent antec ~ # grep zabb /etc/portage/package.use net-analyzer/zabbix agent emerge -a zabbix For some reason the conf file is expected in /etc antec ~ # cp /etc/zabbix/zabbix_agentd /etc/zabbix_agentd.conf antec ~ # ls -l /etc/zabbix_agentd.conf        -rw-r----- 1 zabbix zabbix 7015 Apr 13 23:40 /etc/zabbix_agentd.conf antec ~ # grep -s 192 /etc/zabbix_agentd.conf Server=192.168.192.200 Also had to cread zabbix dir in /run mkdir /run/zabbix chown zabbix:zabbix /run/zabbix systemctl start zabbix-agentd
Read more