CONFIG_NO_HZ_IDLE:  is not set when it should be powertop

-


powertop

 >>> Completed (2 of 2) sys-power/powertop-2.15::gentoo


 * Messages for package sys-power/powertop-2.15:


 *   CONFIG_NO_HZ_IDLE:  is not set when it should be.

 * Please check to make sure these options are set correctly.

 * Failure to do so may cause unexpected problems.






Comments

Post a Comment

Popular posts from this blog

Uploading Firmware to "bricked" Netgear WNDR3800 from Linux with atftp after botched DD-WRT Firmware Upgrade.

-
Image
The Netgear will only accept the original Netgear FW using this TFTP procedure. All attempts loading DD-WRT this way will look like success from the TFTP Client point of view but Router will ignore it. Original Netgear Instructions for Windows are here: https://kb.netgear.com/22688/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP If you want to Flash the DD WRT FW later, you need to recover to the Netgear FW Version WNDR3800-V1.0.0.16.img as later versions are blocking the DD WRT FW Upload on WebInterface. Set the PC to 192.168.1.x/24  but not .1 as this will be router in the recovery mode. Power Off the WNDR3800. Hold the RESET Button and power On the Router. Watch the Power LED Flashing Amber and then changing to Green, Count at least 10 Green Flashes and Release the RESET button. Try to ping the Router at 192.168.1.1 if you do not see any Ping replies, wireshark it and you might see the replies only in the packet trace, still good. Then upload the FW with tftp cl
Read more

sudo sh VMware-Remote-Console-12.0.4-21740317.x86_64.bundle -u vmware-vmrc

-
risko@funtoox99 ~/Downloads $ sh VMware-Remote-Console-12.0.4-21740317.x86_64.bundle -h Extracting VMware Installer...done. Usage: vmware-installer [options] VMware Installer Options:   --version             show program's version number and exit   -h, --help            show this help message and exit   Manage:     Install or uninstall products     -i FILE, --install-bundle=FILE                         Install bundle from FILE     --install-component=FILE                         Install a component     --uninstall-component=NAME                         Force uninstallation of a component     -u NAME, --uninstall-product=NAME                         Uninstall a product     -r, --resolve-system                         Force the system to resolve the current state     --register-file=COMPONENT_NAME (config|regular) FILE                         Register a file in the database     -x DIR, --extract=DIR                         Extract the contents of the bundle into DIR     -p DIR, --pre
Read more

zabbix agent on gentoo

-
add Use Flag agent antec ~ # grep zabb /etc/portage/package.use net-analyzer/zabbix agent emerge -a zabbix For some reason the conf file is expected in /etc antec ~ # cp /etc/zabbix/zabbix_agentd /etc/zabbix_agentd.conf antec ~ # ls -l /etc/zabbix_agentd.conf        -rw-r----- 1 zabbix zabbix 7015 Apr 13 23:40 /etc/zabbix_agentd.conf antec ~ # grep -s 192 /etc/zabbix_agentd.conf Server=192.168.192.200 Also had to cread zabbix dir in /run mkdir /run/zabbix chown zabbix:zabbix /run/zabbix systemctl start zabbix-agentd
Read more