funtoox99 ~ # emerge -vauDN world

-


hmm graphviz -svg ...mkay 

Comments

Post a Comment

Popular posts from this blog

ASUS M4A88T-I Deluxe 16GB RAM 2x8GB DDR3 support and working fine

-
Image
BIOS Information Vendor: American Megatrends Inc. Version: 1201 Release Date: 07/27/2012 Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: M4A88T-I DELUXE Version: Rev X.0x Serial Number: 106050290000193 Processor Information Socket Designation: AM3 Type: Central Processor Family: Phenom II Manufacturer: AMD               ID: 43 0F 10 00 FF FB 8B 17 Signature: Family 16, Model 4, Stepping 3 Version: AMD Phenom(tm) II X4 965 Processor                   Voltage: 1.5 V External Clock: 200 MHz Max Speed: 3400 MHz Current Speed: 3400 MHz Status: Populated, Enabled Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 2 Memory Device Array Handle: 0x0027 Er...
Read more

Uploading Firmware to "bricked" Netgear WNDR3800 from Linux with atftp after botched DD-WRT Firmware Upgrade.

-
Image
The Netgear will only accept the original Netgear FW using this TFTP procedure. All attempts loading DD-WRT this way will look like success from the TFTP Client point of view but Router will ignore it. Original Netgear Instructions for Windows are here: https://kb.netgear.com/22688/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP If you want to Flash the DD WRT FW later, you need to recover to the Netgear FW Version WNDR3800-V1.0.0.16.img as later versions are blocking the DD WRT FW Upload on WebInterface. Set the PC to 192.168.1.x/24  but not .1 as this will be router in the recovery mode. Power Off the WNDR3800. Hold the RESET Button and power On the Router. Watch the Power LED Flashing Amber and then changing to Green, Count at least 10 Green Flashes and Release the RESET button. Try to ping the Router at 192.168.1.1 if you do not see any Ping replies, wireshark it and you might see the replies only in the packet trace, still good. Then upload the FW wit...
Read more

unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2) Loading firmware file 'rt2870.bin'

-
[   17.951626] r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2) [   17.960371] r8169 0000:02:00.0 enp2s0: link down [   17.960384] r8169 0000:02:00.0 enp2s0: link down [   17.960415] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [   18.002341] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [   18.002393] ieee80211 phy0: rt2x00lib_request_firmware: Error - Failed to request Firmware [   20.790008] r8169 0000:02:00.0 enp2s0: link up [   20.790026] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready itx ~ # emerge -a sys-kernel/linux-firmware itx ~ # find /lib/firmware/ -name rtl8168e-2.fw /lib/firmware/rtl_nic/rtl8168e-2.fw itx ~ # find /lib/firmware/ -name rt2870.bin   /lib/firmware/rt2870.bin CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/...
Read more